MC-Basic:axis.HOMEDISTANCE
This property specifies the distance between the home position and the position at the end of the homing procedure.
Short form
<axis>.Hdis
Syntax
<axis>.HomeDistance = <value>
Availability
All versions
Type
Double
Range
Limited by the drive.
Units
User position units.
Default
Dependent on the drive.
Scope
Task or Terminal
Limitations
- The HOMERETURN property must be set in order to move to the HOMEDISTANCE location.Valid in communications phase 2 or higher
- To set the value within a task, the axis must be attached to that task (using the ATTACH command)
- Not supported in EtherCAT system
Examples
a1.hdis = 0
?a1.hdis