Supported Devices by softMC
Contents
Introduction
Following present supported devices that where validated with the softMC in our lab, but is not limited. many other devices as well can operate with the softMC.
Input/Output
Following table present Input/output module that where validate with the softMC
| Manufacture | PN | Description | Vendor | FieldBUS |
|---|---|---|---|---|
| Beckhoff | EK1100 | EtherCAT Coupler | 0x2 | EtherCAT |
| Beckhoff | EL1008 | 8-channel digital input terminal 24 V DC, 3 ms | 0x2 | EtherCAT |
| Beckhoff | EL1088 | 8-channel digital input terminal 24 V DC, negative switching | 0x2 | EtherCAT |
| Beckhoff | EL2008 | 8-channel digital output terminal 24 V DC, 0.5 A | 0x2 | EtherCAT |
| Beckhoff | EL1809 | EtherCAT Terminal 16-channel digital, input 24 V DC | 0x2 | EtherCAT |
| Beckhoff | EL2809 | EtherCAT Terminal 16-channel digital output 24 V DC, 0.5 A | 0x2 | EtherCAT |
| Beckhoff | EL3356 | 1-channel precise load cell analysis (resistor bridge), 16 bit | 0x2 | EtherCAT |
| Beckhoff | EL2088 | 8-channel digital output terminal 24 V DC, negative switching | 0x2 | EtherCAT |
| Beckhoff | EL3064 | Analog Input Terminal; 4 and 8 channel, 12 bit, 0 V ... +10 V, single-ended inputs | 0x2 | EtherCAT |
| Beckhoff | EL2809 | 16-chanel digital output | 0x2 | EtherCAT |
| Beckhoff | EL4134 | 4x analog output / 16 bit -10...+10V / load >5 KOhm | 0x2 | EtherCAT |
| esd | ECX-DIO8 | EtherCAT® Digital I/O-Module 8 digital I/Os | 0x17 | EtherCAT |
| Weidmuller | UR20-FBC-EC | Remote I/O coupler | 0x00000230 | EtherCAT |
| Weidmuller | UR20-16DI-N | I/O module | 0x00000230 | EtherCAT |
| WAGO | FC 750 | module | 0x00000021 | EtherCAT |
| PHOENIX | BK EC | Bus coupler - AXL F BK EC | 0x84 | EtherCAT |
| PHOENIX | AXL F DI8/1 DO8/1 1H | I/O module | 0x84 | EtherCAT |
| PHOENIX | AXL F AI4 U 1H | I/O module | 0x84 | EtherCAT |
| PHOENIX | AXL F AI8 1F | I/O module | 0x84 | EtherCAT |
| PHOENIX | AXL F DO 16/1 1H | I/O module | 0x84 | EtherCAT |
| PHOENIX | AXL F DI 16/1 1H | I/O module | 0x84 | EtherCAT |
| PHOENIX | AXL F AO4 1H | I/O module | 0x84 | EtherCAT |
| PHOENIX | AXL AI 8-ME | I/O module | 0x84 | EtherCAT |
| Empower | EIM 9100 | EtherCAT coupler | 0x1A | EtherCAT |
| Empower | EIM 1016 | 16 Digital inputs | 0x1A | EtherCAT |
| Empower | EIM 1116 | 16 Digital inputs | 0x1A | EtherCAT |
| Empower | EIM 2116 | 16 Digital outputs | 0x1A | EtherCAT |
| Empower | EIM 3118 | 8 Analog inputs | 0x1A | EtherCAT |
| Empower | EIM 4118 | 8 Analog outputs | 0x1A | EtherCAT |
| Empower | EIM 5312 | PWM module | 0x1A | EtherCAT |
| Empower | EIM 5322 | PWM module | 0x1A | EtherCAT |
| FESTO | CTEU-EC 572556 | EtherCAT bus node | 0x00000026 | EtherCAT |
| Optoforce | HEX-70-XE | Force Sensor | 0x5D4 | EtherCAT |
Cards
Following table present Cards that where validate with the softMC
| Manufacture | PN | Description | Vendor | FieldBUS |
|---|---|---|---|---|
| hilscher | CIFX 50-RE | Communication Interface PCI Real-Time-Ethernet | EtherCAT |
HMI
Following table present HMI that where validate with the softMC
| Manufacture | PN | Description | Vendor | FieldBUS |
|---|---|---|---|---|
| Exor | +ESMA07MU301 | 7 eSMART07M" TFT 16:9 wide color display | Modbus TCP/IP | |
| M2i | XTOP07TW-LD-E | 7" 800x480 TFT color display | Modbus TCP/IP | |
| Samkon | SK-xxxAS | 5" 7.2" 10.2" with Ethernet | Modbus TCP/IP | |
| Kinco | MT4x3xT&TE | 4.3" 7" 10" with Ethernet | Modbus TCP/IP |