MC-Basic:element.ACCELERATIONRATE/zh-hans
| 语言: | [[::MC-Basic:element.ACCELERATIONRATE|English]] • [[::MC-Basic:element.ACCELERATIONRATE/zh-hans|中文（简体）]] |
|---|
缩写
<element>.ARate
格式
<element>.AccelerationRate = <value>
?<element>.AccelerationRate
适用版本
从版本4.0.1起
描述
此属性定义元素加速度最大缩放因子。 加速度的最大值可以独立缩放，与速度，减速度或加加速度无关。
类型
Double
取值范围
0.1 to 100
 | NOTE |
| Contrary to other properties if a value beyond the given range is assigned to rate properties (Vrate,Arate,Jrate, ...),only a NOTE will be returned and the value will be automatically limited to min-max value. For example Vrate = 0 will set Vrate to 0.1 and vrate = 1000 will set vrate to 100. |
与其他属性相反的是，如果将超出给定范围的值分配给速率属性 <nowiki>（Vrate，Arate，Jrate，...），只会返回一个注释，该值将自动限制为最小值。
单位
Percents
默认
100
使用范围
Task or Terminal
限制
To set the value within a task, the element must be attached to that task or through the command line. The total accelerationrate value is combination of the system’s value and the element’s.
例子
Axis
Setting: A1.arate = 70 will cause the system to reduce maximum acceleration value to 70% of its original value. This means the motion acceleration will not exceed: (sys.arate/100)*(A1.arate/100)*A1.amax
?A1.arate
Group
Setting: G1.arate = 70 will cause the system to reduce maximum acceleration value to 70% of its original value. This means the motion acceleration will not exceed: (sys.arate/100)*(G1.arate/100)*G1.amax
?G1.arate