MC-Basic:DETACH

From SoftMC-Wiki
Revision as of 10:58, 20 March 2014 by Lisa (talk | contribs) (Text replace - "Write-Only" to "Write only")
Jump to: navigation, search

This command is used to detach a task from a motion element, freeing it for use by another task. If the motion element is moving, DETACH waits until the motion of the element ends. Motion element may be axis or group.

Syntax

Detach <element>

Availability

All versions

Range

Defined motion element

Scope

Task

Limitations

Write only. The defined motion element must have been previously attached.

Examples

Detach XYTable