CANopen:SET PCMD PDO DADD

From SoftMC-Wiki
Revision as of 14:42, 26 August 2014 by Lisa (talk | contribs) (Text replace - "Template:CANopen-Firmware-Functions" to "Template:CANopen Firmware Functions")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Set COBID and location of 32-bit Position Command (MC-Basic:axis.COUNTCOMMAND) inside TPDO.

Input

dadd: device address (physical network address)
cobid: CAN COBID
offset: offset inside PDO, starting from 0
size: in bytes, for example 0x607a.0 is 4 bytes long
Important note
Control Word and either "Position Command" or "Velocity Command" or "Torque Command" must be mapped to the same PDO.
if Control Word is not mapped, COB id of either pcmd, vcmd or vcmd will be used instead

Output

None

Return Value

None

Declaration

import_c SET_PCMD_PDO_DADD(byval as long,byval as long,byval as long,byval as long)

Syntax

SET_PCMD_PDO_DADD(<dadd>,<cobid>,<offset>,<size>)

Exceptions

None

Examples

SET_PCMD_PDO_DADD(1,0,0,0) ' Unmap Position Command
SET_PCMD_PDO_DADD(1,0x200,2 , 4) ' Position Command is located in bytes 2,3,4,5 of TPDO with COBID 0x200

See Also