Category:CANOpen:Firmware-Functions

From SoftMC-Wiki
Revision as of 08:33, 21 August 2014 by Lisa (talk | contribs) (Text replace - "CANOpen" to "CANopen")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Firmware functions for manipulation with CANopen objects and configuration of motion controller for CANopen network.
Used (imported) by CANDS402.LIB
In all CANopen function slave address is physical address of CAN node, from 1 to 127.
Address is usually set with DIP or Rotary switch. Some devices do not physical switch and address is set (pre-programmed) in device' eerom using special vendor-specific tool.

This category currently contains no pages or media.