Difference between revisions of "MC-Basic:axis.SLAVEDISABLE"
(AXY: new links) |
|||
| Line 1: | Line 1: | ||
| − | {{Languages}} | + | {{Languages|MC-Basic:axis.SLAVEDISABLE}} |
{{MC-Basic | {{MC-Basic | ||
|SHORT FORM= | |SHORT FORM= | ||
| Line 60: | Line 60: | ||
|SEE ALSO= | |SEE ALSO= | ||
| − | * [[ | + | * [[MC-Basic:element.SLAVE|SLAVE]] |
* [[MC-Basic:axis.SLAVEDISABLE|axis.SLAVEDISABLE]] | * [[MC-Basic:axis.SLAVEDISABLE|axis.SLAVEDISABLE]] | ||
* [[MC-Basic:axis.MASTERSOURCE|axis.MASTERSOURCE]] | * [[MC-Basic:axis.MASTERSOURCE|axis.MASTERSOURCE]] | ||
Latest revision as of 12:23, 13 September 2017
| Language: | English • 中文（简体） |
|---|
Once <axis>.SlaveDisable is on, each time the axis is disabled (due to an error, or by direct assignment such as ”en=0”), all of its slave axes will be disabled.
If the user directly enters:
- master_axis.en = 0
- If the default error handler disables the axis
- If the axis is disabled by an automatic disable due to a position error on a stopped axis
- If the torque threshold is exceeded on a stopped axis.
- If the VOSPD is exceeded on a stopped axis
- If the master is disabled because it is a part of the group that is being disabled (or some axes of it are).
- If the master is disabled because being master of another axis having <axis>.SlaveDisconnect flag set to 0.(This is when this feature is on).
 | NOTE |
| Take special care to avoid loops. That is, if the master disables the slave and the slave disables the master, there must be a way to explicitly enable the master-slave pair. |
Syntax
<axis>.SlaveDisable = <expression>
?<axis>.SlaveDisable
Availability
From: 4.4.3
Type
Long
Range
0 to 1
Default
0
Scope
Configuration, Task or Terminal
Limitations
- Cannot be changed during motion command execution.
- To set the value within a task, the axis must be attached to that task (using the ATTACH command).
- Values 1 and 2 (slave/cam) are valid for axes only, and values 3, 4 and 5 are valid for groups only.
Examples
Xaxis.SlaveDisable = 1