Difference between revisions of "AXY:MC-Basic:group.PROFILERTYPE"

From SoftMC-Wiki
Jump to: navigation, search
m (Text replace - "Axystems:" to "")
m
Line 13: Line 13:
  
 
* -1 - profile type is defined by the [[MC-Basic:axis.SMOOTHFACTOR|SmoothFactor]] (from version 4.7.3 only)
 
* -1 - profile type is defined by the [[MC-Basic:axis.SMOOTHFACTOR|SmoothFactor]] (from version 4.7.3 only)
−
* 0 – Velocity based Velocity trapeze (VT) <br>
+
* 0 – Velocity based trapezoidal velocity (TV) <br>
−
* 1 – Velocity based Sine acceleration (SA) <br>
+
* 1 – Velocity based sine acceleration (SA) <br>
−
* 2 – Time based trapeze acceleration (TA) or velocity trapeze (VT)  
+
* 2 – Time based trapezoidal acceleration (TA) or trapezoidal velocity (TV)  
−
* 3 - Constant Velocity profile (one sample acceleration and one sample deceleration)
+
* 3 - Constant velocity profile (one sample acceleration and one sample deceleration)
  
  
Line 44: Line 44:
  
 
|SEE ALSO=
 
|SEE ALSO=
−
* [[ Time Based Profile (Trapeze Acceleration)|Time Based Profile]]
+
* [[ Time Based Profile (Trapezoidal Acceleration)|Time Based Profile]]
  
 
}}
 
}}

Revision as of 14:11, 18 November 2014

Defines the profiler-type used in the motion.

  • -1 - profile type is defined by the SmoothFactor (from version 4.7.3 only)
  • 0 – Velocity based trapezoidal velocity (TV)
  • 1 – Velocity based sine acceleration (SA)
  • 2 – Time based trapezoidal acceleration (TA) or trapezoidal velocity (TV)
  • 3 - Constant velocity profile (one sample acceleration and one sample deceleration)


IMPORTANT.svgIMPORTANT
  • If MODAL value of the PrfType equals -1 (default from 4.7.3!) the SmoothFactor is the only one who determines the profile type.

Values of the SmoothFactor between [1,100] and the value of -1 define the SINE-ACCELERATION profile and value of zero the VELOCITY-TRAPEZE profile.

  • If MODAL value of PrfType differs from -1, SmoothFactor has no influence on the type of the profile. Still the SmoothFactor defines the JERK value (as before).

Short form

PrfType

Syntax

<group>.profilertype = <numeric expression>

Availability

Since Version 4.5.25

Type

Long

Range

-1-3

Default

-1 (from 4.7.3 version only)

Scope

Configuration, Task, Terminal

Limitations

Modal/Nodal

See Also

Retrieved from "http://softmc.servotronix.com/index.php?title=AXY:MC-Basic:group.PROFILERTYPE&oldid=125042"