CANopen:SET VCMD PDO DADD

Set COBID and location of 32-bit Velocity Command inside TPDO.

Input

dadd: device address (physical network address)
cobid: CAN COBID
offset: offset inside PDO, starting from 0
size: in bytes, for example 0x607a.0 is 4 bytes long
Important note
Control Word and either "Position Command" or "Velocity Command" or "Torque Command" must be mapped to the same PDO.
if Control Word is not mapped, COB id of either pcmd, vcmd or vcmd will be used instead

Output

None

Return Value

None

Declaration

import_c SET_VCMD_PDO_DADD(byval as long,byval as long,byval as long,byval as long)

Syntax

SET_VCMD_PDO_DADD(<dadd>,<cobid>,<offset>,<size>)

Exceptions

None

Examples

SET_VCMD_PDO_DADD(1,0,0,0) ' Unmap Velocity Command
SET_VCMD_PDO_DADD(1,0x200,2 , 4) ' Velocity Command is located in bytes 2,3,4,5 of TPDO with COBID 0x200

See Also

• CAN_SDO_WRITE
• SET_CONTROL_PDO_DADD
• SET_STATUS_PDO_DADD
• SET_PCMD_PDO_DADD
• SET_PFB_PDO_DADD
• SET_VCMD_PDO_DADD
• SET_VFB_PDO_DADD
• SET_TCMD_PDO_DADD
• SET_TDCMD_PDO_DADD
• SET_CFB_PDO_DADD
• SET_DOUT_PDO_DADD
• Configuration_Example