Difference between revisions of "Category:CANOpen:Firmware-Functions"

From SoftMC-Wiki
Jump to: navigation, search
(Created page with "Firmware functions for manipulation with CANOpen objects and configuration of motion controller for CANOpen network.<br> '''Used (imported) by CANDS402.LIB<br>''' '''<big>In a...")
 
m (Text replace - "CANOpen" to "CANopen")
 
Line 1: Line 1:
Firmware functions for manipulation with CANOpen objects and configuration of motion controller for CANOpen network.<br>
+
Firmware functions for manipulation with CANopen objects and configuration of motion controller for CANopen network.<br>
 
'''Used (imported) by CANDS402.LIB<br>'''
 
'''Used (imported) by CANDS402.LIB<br>'''
'''<big>In all CANOpen function slave address is physical address of CAN node, from 1 to 127. <br></big>'''
+
'''<big>In all CANopen function slave address is physical address of CAN node, from 1 to 127. <br></big>'''
 
Address is usually set with DIP or Rotary switch. Some devices do not physical switch and address is set (pre-programmed) in device' eerom using special vendor-specific tool.
 
Address is usually set with DIP or Rotary switch. Some devices do not physical switch and address is set (pre-programmed) in device' eerom using special vendor-specific tool.

Latest revision as of 08:33, 21 August 2014

Firmware functions for manipulation with CANopen objects and configuration of motion controller for CANopen network.
Used (imported) by CANDS402.LIB
In all CANopen function slave address is physical address of CAN node, from 1 to 127.
Address is usually set with DIP or Rotary switch. Some devices do not physical switch and address is set (pre-programmed) in device' eerom using special vendor-specific tool.

This category currently contains no pages or media.