Difference between revisions of "MC-Basic:axis.PositionBacklash"
m (Miborich moved page Axystems:MC-Basic:axis.PositionBacklash to MC-Basic:axis.PositionBacklash: Global renaming of Axystems: namespace into (Main):) |
|||
| Line 10: | Line 10: | ||
Adds a position backlash value to the PCMD value. The value will be added to the positive direction of the movement (<''axis''>.VCMD > 0), while in opposite direction the value multiplied by -1 is used. At a standstill (VCMD = 0), the previous value of the backlash is used. | Adds a position backlash value to the PCMD value. The value will be added to the positive direction of the movement (<''axis''>.VCMD > 0), while in opposite direction the value multiplied by -1 is used. At a standstill (VCMD = 0), the previous value of the backlash is used. | ||
| − | Differences between positive and negative applied backlash values will be smoothened by a simple alpha-filter: [[ | + | Differences between positive and negative applied backlash values will be smoothened by a simple alpha-filter: [[MC-Basic:axis.PositionBacklashAlpha]]. |
According to: | According to: | ||
| Line 38: | Line 38: | ||
a1.PositionBacklash = 0.5 | a1.PositionBacklash = 0.5 | ||
|SEE ALSO= | |SEE ALSO= | ||
| − | * [[ | + | * [[MC-Basic:axis.PositionBacklashAlpha|PositionBacklashAlpha]] |
}} | }} | ||
Revision as of 08:47, 22 May 2014
Adds a position backlash value to the PCMD value. The value will be added to the positive direction of the movement (<axis>.VCMD > 0), while in opposite direction the value multiplied by -1 is used. At a standstill (VCMD = 0), the previous value of the backlash is used.
Differences between positive and negative applied backlash values will be smoothened by a simple alpha-filter: MC-Basic:axis.PositionBacklashAlpha.
According to:
P = P × Alpha + <sign> × PositionBacklash × (1-Alpha)
where <sign> = -1 on VCMD <0 else equals 1.
 | IMPORTANT |
| The backlash position value is not compensated in the position feedback. Therefore, applying position backlash to a non-zero value will result the same opposite value in the position error (PE). It will look like PE is never closed. |
Short form
None
Syntax
<axis>.PositionBacklash = <double>
Availability
4.5.33 and later
Type
Double
Range
MIND ... MAXD
Units
Position user units
Default
0
Scope
Task, Terminal
Limitations
Modal only
Examples
a1.PositionBacklash = 0.5