Difference between revisions of "MC-Basic:axis.PositionBacklash"

From SoftMC-Wiki
Jump to: navigation, search
Line 14: Line 14:
 
According to:
 
According to:
  
P = P*Alpha + sign × PositionBacklash × (1-Alpha)
+
P = P × Alpha + ''sign'' × PositionBacklash × (1-Alpha)
  
 
where sign = -1 on VCMD <0 else equals 1.  
 
where sign = -1 on VCMD <0 else equals 1.  

Revision as of 07:08, 19 March 2014

Adds a position backlash value to the PCMD value. The value will be added to the positive direction of the movement (<axis>.VCMD > 0), while in opposite direction the value multiplied by -1 is used. At a standstill (VCMD = 0), the previous value of the backlash is used.

Differences between positive and negative applied backlash values will be smoothened by a simple alpha-filter: Axystems:MC-Basic:axis.PositionBacklashAlpha.

According to:

P = P × Alpha + sign × PositionBacklash × (1-Alpha)

where sign = -1 on VCMD <0 else equals 1.


IMPORTANT.svgIMPORTANT
The backlash position value is not compensated in the position feedback. Therefore, applying position backlash to a non-zero value will result the same opposite value in the position error (PE). It will look like PE is never closed.


WARNING.svgWARNING
Use caution with this feature. It has not been fully tested.

Short form

None

Syntax

<axis>.PositionBacklash = <double>

Availability

4.5.33 and later

Type

Double

Range

MIND ... MAXD

Units

Position user units

Default

0

Scope

Task, Terminal

Limitations

Modal only

Examples

a1.PositionBacklash = 0.5

See Also