Difference between revisions of "Operating CODESYS with softMC Guide Line"

From SoftMC-Wiki
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
{{Languages}}
+
{{Languages|Operating_CODESYS_with_softMC_Guide_Line}}
 
= CODESYS Installation =  
 
= CODESYS Installation =  
  
Line 11: Line 11:
 
Please contact SERVOTRONIX in order to get the following files:
 
Please contact SERVOTRONIX in order to get the following files:
  
* '''‘mc-0.4.17.4-C2-MULTIBUS-x86-CODESYS_With_WebVisu.ipk’ -''' contains the firmware upgrade for softMC7 Multibus CODESYS
+
* '''‘mc-0.4.17.4-C2-MULTIBUS-x86-CODESYS_With_WebVisu.ipk’ -''' contains the firmware upgrade for softMC Multibus CODESYS
 
* '''‘codesys_drivers_2.ipk’'''
 
* '''‘codesys_drivers_2.ipk’'''
 
* '''‘softMC_1_0_0_1.compiled-library’'''
 
* '''‘softMC_1_0_0_1.compiled-library’'''
Line 27: Line 27:
  
 
1. Open ControlStudio. <br/>
 
1. Open ControlStudio. <br/>
2. Connect to softMC7.<br/>
+
2. Connect to softMC.<br/>
 
3. Please type in the terminal:<br/>
 
3. Please type in the terminal:<br/>
 
   <pre>        ?sys.information    </pre>
 
   <pre>        ?sys.information    </pre>
Line 33: Line 33:
 
:Please send a picture of the information.
 
:Please send a picture of the information.
 
4. go to:
 
4. go to:
::Tools -> Firmware Update -> choose mc-0.4.17.4-C2-MULTIBUS-x86-CODESYS_With_WebVisu.ipk  
+
::Tools -> Firmware Update -> choose 'mc-0.4.17.4-C2-MULTIBUS-x86-CODESYS_With_WebVisu.ipk'
 
5. During the Firmware Update the MC will reboot twice.<br/>  
 
5. During the Firmware Update the MC will reboot twice.<br/>  
 
6. After first installation, please go to:
 
6. After first installation, please go to:
::Tools -> Firmware Update -> choose codesys_drivers_2.ipk
+
::Tools -> Firmware Update -> choose 'codesys_drivers_2.ipk'
 
7. During the Firmware Update the MC will reboot twice.<br/>  
 
7. During the Firmware Update the MC will reboot twice.<br/>  
  
Line 56: Line 56:
  
 
1. Open ControlStudio.<br/>
 
1. Open ControlStudio.<br/>
2. Connect to softMC7.<br/>
+
2. Connect to softMC.<br/>
 
3. Send SN_UAC.LIB to softMC by dragging it into File Manager.<br/>
 
3. Send SN_UAC.LIB to softMC by dragging it into File Manager.<br/>
 
4.  
 
4.  
Line 81: Line 81:
 
! scope="col"|Task || ! scope="col"| Reference delivered by SERVOTRONIX ||! scope="col"| Status
 
! scope="col"|Task || ! scope="col"| Reference delivered by SERVOTRONIX ||! scope="col"| Status
 
|-
 
|-
| Firmware to support CODESYS for softMC 7 EtherCAT || MC FW installation files (.IPK/.ZIP) || '''STX''':  provide FW zip file
+
| Firmware to support CODESYS for softMC EtherCAT || MC FW installation files (.IPK/.ZIP) || '''STX''':  provide FW zip file
 
'''CUSTOMER''': install  CODESYS Runtime and send:
 
'''CUSTOMER''': install  CODESYS Runtime and send:
  

Latest revision as of 09:33, 4 March 2018

Language: English  • 中文(简体)‎

CODESYS Installation

CODESYS.png



Please contact SERVOTRONIX in order to get the following files:

  • ‘mc-0.4.17.4-C2-MULTIBUS-x86-CODESYS_With_WebVisu.ipk’ - contains the firmware upgrade for softMC Multibus CODESYS
  • ‘codesys_drivers_2.ipk’
  • ‘softMC_1_0_0_1.compiled-library’
  • ‘Configurator_archive_0.4.17.4.bndl’
  • ‘SN_UAC.LIB’


Please follow the steps below:


Part 1:

1. Open ControlStudio.
2. Connect to softMC.
3. Please type in the terminal:

         ?sys.information    
Check the ‘Maximum number of axes’.
Please send a picture of the information.

4. go to:

Tools -> Firmware Update -> choose 'mc-0.4.17.4-C2-MULTIBUS-x86-CODESYS_With_WebVisu.ipk'

5. During the Firmware Update the MC will reboot twice.
6. After first installation, please go to:

Tools -> Firmware Update -> choose 'codesys_drivers_2.ipk'

7. During the Firmware Update the MC will reboot twice.

8. After the process ends, please check the new version by typing in the terminal:

         ?sys.information    

Now you should see (among rest):

  • Version number: 0.4.17.4
  • Features: CODESYS:0x61131

9. Please provide:

  • Hash number
  • Serial number
  • Maximum number of axes (from before the upgrade – after the upgrade it should be zero until installation of the UAC).

10. Once you provide these details, you will receive UAC (User Authorization Code) and further instructions.


Part 2 (When UAC is provided):

1. Open ControlStudio.
2. Connect to softMC.
3. Send SN_UAC.LIB to softMC by dragging it into File Manager.
4.

         Loadglobal SN_UAC.LIB 

5. Use the following function ‘?Set_SN_UAC_Files(byval SN_str as string, byval UAC_str as string)' :

         ?Set_SN_UAC_Files(“your serial number”, “your UAC”) 

5. Reboot the machine.
6. Check sys.information to see maximum number of axes.

         ?sys.information    


  • When upgrade is finished, you can use the ControlStudio Configurator to create the XML file (device description file).
Please use the Configurator training guide in the website.
  • In CODESYS: Please install the ‘softMC_1_0_0_1.compiled-library’ into Tools -> Library Repository (one time installation).
  • In CODESYS: Please install the device description file (created by the Configurator) into Tools -> Device Repository (when using a new XML file).


Summary

Task Reference delivered by SERVOTRONIX Status
Firmware to support CODESYS for softMC EtherCAT MC FW installation files (.IPK/.ZIP) STX: provide FW zip file

CUSTOMER: install CODESYS Runtime and send:

  • Serial number
  • Hash number
  • max number of axes

STX: provide UAC number

Install ControlStudio with Configurator configurator_archive_0.4.17.4.bndl Download from website
Run Configurator User manual: softMC_Configurator_Setup_Training_Rev.1.0.pdf Download from website
XML file for Device Repository Created by ControlStudio Configurator
softMC.compiled-library for CODESYS softMC_1_0_0_1.compiled-library Download from website – version 1.0.0.1
CODESYS examples files for basic operation of softMC w two CDHD FLIP_FLOP_FBD.project

FLIP_FLOP_LADDER.project

FLIP_FLOP_ST.project

LABELING_FBD.project

LABELING_LADDER.project

LABELING_ST.project

MAIN_MOTION_FBD.project

MAIN_MOTION_LADDER.project

MAIN_MOTION_ST.project

Download from website



CODESYS - Procedure

Below is a scheme of the procedure for using CODESYS with softMC:

Scheme.PNG