Difference between revisions of "MC-Basic:LOAD"
m (Minor changes) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 14: | Line 14: | ||
The StackSize optional parameter sets the size of local (Dim) variables’ stack. Its value is a actually a floating point multiplier of an internal basic stack size. This basic stack size is the lowest size allowed for local data stack (when size multiplier is 1), whereas the highest value depends on the amount of free memory available. | The StackSize optional parameter sets the size of local (Dim) variables’ stack. Its value is a actually a floating point multiplier of an internal basic stack size. This basic stack size is the lowest size allowed for local data stack (when size multiplier is 1), whereas the highest value depends on the amount of free memory available. | ||
| − | From Version MULTIBUS 0.4.15.8, '''with''' functionality allows to load a task together with libraries which | + | From Version MULTIBUS 0.4.15.8, '''with''' functionality allows to load a task together with libraries which are automatically included in the loaded task. |
| + | When used in CONFIG.PRG, loading a library is equivalent to using [[MC-Basic:LOADGLOBAL|LOADGLOBAL]] for loading a global library. | ||
| + | |||
{{Note|The command line operates at priority level 2. If a task is started at priority level 1, the command line is not operable until the task ends or until it releases the CPU.}} | {{Note|The command line operates at priority level 2. If a task is started at priority level 1, the command line is not operable until the task ends or until it releases the CPU.}} | ||
| Line 43: | Line 45: | ||
|SCOPE= | |SCOPE= | ||
| − | Task, library or Terminal | + | Task, library or Terminal for programs and [[MC-Basic:IMPORT|IMPORTED]] ( local ) libraries |
| − | Configuration | + | Configuration for global libraries |
|LIMITATIONS= | |LIMITATIONS= | ||
| Line 65: | Line 67: | ||
* [[MC-Basic:STARTTASK|STARTTASK]] | * [[MC-Basic:STARTTASK|STARTTASK]] | ||
* [[MC-Basic:IMPORT|IMPORT]] | * [[MC-Basic:IMPORT|IMPORT]] | ||
| + | * [[MC-Basic:LOADGLOBAL|LOADGLOBAL]] | ||
[[Category:MC-Basic:Task Control|LOAD]] | [[Category:MC-Basic:Task Control|LOAD]] | ||
}} | }} | ||
Latest revision as of 03:38, 25 April 2022
This command loads a programs and libraries from the flash memory into RAM, from where it may be executed. During the process, the program or library is checked for syntax errors. Syntax errors are written to the TRN.ERR file, which may be retrieved to see which errors occurred. Only programs without syntax errors may be executed. Programs are executed using the STARTTASK command. The Priority sets the <priority level> at which the task is run within the system. The highest priority is 1, which causes the task to be run after all realtime tasks have run. The lowest priority is 16. Tasks with the same priority level run using a round-robin procedure, which gives equal time to each task. A low priority task cannot interrupt a high priority task.
The StackSize optional parameter sets the size of local (Dim) variables’ stack. Its value is a actually a floating point multiplier of an internal basic stack size. This basic stack size is the lowest size allowed for local data stack (when size multiplier is 1), whereas the highest value depends on the amount of free memory available.
From Version MULTIBUS 0.4.15.8, with functionality allows to load a task together with libraries which are automatically included in the loaded task.
When used in CONFIG.PRG, loading a library is equivalent to using LOADGLOBAL for loading a global library.
 | NOTE |
| The command line operates at priority level 2. If a task is started at priority level 1, the command line is not operable until the task ends or until it releases the CPU. |
Syntax
Load <filename> {Priority = <priority level>} {StackSize = <stacksize multiplier>} {with <libraryName>, <libraryName>,<libraryName>... }
Availability
All versions
Type
<filename>: File specification, including file name and extension.
<priority level>: Long
<stacksize multiplier>: Double
<libraryName>: File specification, including file name and extension
Range
<filename>: The file must exist in the flash memory.
<libraryName>: The file must exist in the flash memory.
<priority level>: 1 to 16
<stacksize multiplier>:1 to MaxDouble
Default
<priority level>: 16
<stacksize multiplier>:1
Scope
Task, library or Terminal for programs and IMPORTED ( local ) libraries
Configuration for global libraries
Limitations
The only limitation is free memory space. The largest block of free memory may be queried using the SYSTEM.MAXMEMBLOCK query.
Examples
Load MAKECUT.PRG
Load myTask1.PRG with myLib1.lib
Load myTask.PRG with myLib1.lib, mylib2.lib, mylib3.lib
Load LIBRARY1.LIB