Difference between revisions of "CANopen:SET PCMD PDO DADD"
m (Lisa moved page CANOpen:SET PCMD PDO DADD to CANopen:SET PCMD PDO DADD: correction of CANopen) |
m (Text replace - "Template:CANopen-Firmware-Functions" to "Template:CANopen Firmware Functions") |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | {{Template:CANopen | + | {{Template:CANopen Firmware Functions |
|DESCRIPTION= | |DESCRIPTION= | ||
| Line 44: | Line 44: | ||
* [[CANopen:SET DOUT PDO DADD|SET_DOUT_PDO_DADD]] | * [[CANopen:SET DOUT PDO DADD|SET_DOUT_PDO_DADD]] | ||
* [[CANopen:Configuration Example|Configuration_Example]] | * [[CANopen:Configuration Example|Configuration_Example]] | ||
| + | |||
}} | }} | ||
Latest revision as of 14:42, 26 August 2014
Set COBID and location of 32-bit Position Command (MC-Basic:axis.COUNTCOMMAND) inside TPDO.
Input
dadd: device address (physical network address)
cobid: CAN COBID
offset: offset inside PDO, starting from 0
size: in bytes, for example 0x607a.0 is 4 bytes long
Important note
Control Word and either "Position Command" or "Velocity Command" or "Torque Command" must be mapped to the same PDO.
if Control Word is not mapped, COB id of either pcmd, vcmd or vcmd will be used instead
Output
None
Return Value
None
Declaration
import_c SET_PCMD_PDO_DADD(byval as long,byval as long,byval as long,byval as long)
Syntax
SET_PCMD_PDO_DADD(<dadd>,<cobid>,<offset>,<size>)
Exceptions
None
Examples
SET_PCMD_PDO_DADD(1,0,0,0) ' Unmap Position Command
SET_PCMD_PDO_DADD(1,0x200,2 , 4) ' Position Command is located in bytes 2,3,4,5 of TPDO with COBID 0x200