Wiring

From SoftMC-Wiki
Revision as of 08:11, 22 April 2018 by Itay (talk | contribs)
Jump to: navigation, search

softMC 3

softMC 3 CANopen with stepIM

softMC-3 Networks stepIM CAN v4a.png

softMC 3 CANopen with CDHD

softMC-3 Networks CDHD CAN v4a.png

softMC 7

softMC 7 CANopen with stepIM

softMC-7 Networks stepIM CAN v4a.png

softMC 7 CANopen with CDHD

softMC-7 Networks CDHD CAN v4a.png

softMC 7 EtherCATwith CDHD

softMC-7 Networks CDHD EtherCAT v4a.png

Secondary Encoder

Some application requires an external encoder (secondary encoder).
To be able to use secondary encoder device - Differential A/B encoder only - user have to connect is to C3 interface in the CDHD:


secEn 1.png


Activate

To activate secondary encoder function it's necessary to set drive GEARMODE to 3 (and SAVE this setting) using ServoStudio

NOTE-Info.svgNOTE
The external position is monitored by the drive in all operation modes - position, velocity and torque


When secondary encoder is active, one can read it's position through EtherCAT object 0x20B6 sub-index 0.
By mapping this object to PDO (using softMC Configurator), encoder position can be monitored using <axis>.pext command.


Exmale

In this example we assume that axis 1 has external encoder connected to it's CDHD drive

This simple example print each second axis position according to the secondary encoder:

program continue
    while 1
        call axisExternalPos
        sleep 1000

end program

public sub axisExternalPos
    print "a1 external position is: " + str$(a1.pext)

end sub