MC-Basic:pls.PLSENABLE

From SoftMC-Wiki
Revision as of 08:36, 22 May 2014 by Miborich (talk | contribs)
Jump to: navigation, search

Enable or disable the PLS(s). After being defined, a PLS is disabled. That is, the output pattern is not generated. The output is fired when the PLS is enabled. The PLS output is set to the defined initial state when the PLS is enabled.

Short form

<pls>.PEn

Syntax

<pls>.PlsEnable = 1 | 0

?<pls>.PlsEnable

Availability

All versions

Type

Long

Range

0 (OFF)

1 (ON)

Default

0

Scope

Configuration, Task or Terminal

Limitations

The PLS position data must be monotonic.

Examples

PLS1.Pen = 10

See Also