MC-Basic:axis.SLAVELAG

From SoftMC-Wiki
Revision as of 02:52, 21 April 2017 by Chi (talk | contribs)
Jump to: navigation, search
Language: [[::MC-Basic:axis.SLAVELAG|English]]  • [[::MC-Basic:axis.SLAVELAG/zh-hans|中文(简体)‎]]

This is a read-only property that returns the accumulated position error. This value is set to zero at power up and when gearing is disabled. An incremental move above the geared axis is performed to cancel the accumulated position error.

Position error is accumulated when the axis is put into Gear mode (AXIS.SLAVE=GEAR) while the master is already at speed. When this occurs, the velocity of the slave axis ramps to the velocity of the master and, during this time, its acceleration is limited by the value of ACCELERATION. The MASTERSYNC property indicates when the velocity of the slave axis has reached that of the master axis.

Syntax

?<axis>.SlaveLag

Availability

All versions

Type

Double

Range

± MaxDouble

Default

0

Scope

Configuration, Task or Terminal

Limitations

Read only

Examples

Move Xaxis Xaxis.SlaveLag Absolute = 0

See Also