MC-Basic:WITHGLOBAL

From SoftMC-Wiki
Revision as of 14:56, 16 August 2017 by Itay (talk | contribs)
Jump to: navigation, search
Language: [[::MC-Basic:WITHGLOBAL|English]]  • [[::MC-Basic:WITHGLOBAL/zh-hans|中文(简体)‎]]

This command sets a default motion element (axis or group) that replace previous WITH statement, that sets on the CONFIG.PRG file. Like the "WITH" statement, the motion element will operated on without having to explicitly indicate the motion element name.
The default motion element exists only after a WithGlobal statement, which is terminated by a new WithGlobal statement, or by "reset all" command applied within the Terminal.


NOTE-Info.svgNOTE
Unlike using local WITH, that required "With..... → End With" statements when operated from the Terminal, when using the "WithGlobal" statement, there's NO need to declare "End WithGlobal".

Syntax

WithGlobal <element name>

Availability

4.17.6

Scope

Configuration, Task or Terminal

  • In the Terminal scope, the specified motion element becomes the default motion element for the system, that replace ALL previous WITH/WITHGLOBAL statement, from all scopes.
  • The way to "kill" a WithGlobal statement that declared in Config.prg, is to use reset all command, and change the Config.prg file as you wish.
    Notice - this is NOT a replacement method.

Limitations

  • The WithGlobal command cannot be set in run time.
  • WithGlobal commands can't be nested.
  • Each WithGlobal block must be explicitly created, BUT there is no need to explicitly terminated it before executing another WithGlobal statement.
  • A subroutine called from within a WithGlobal block does not inherit the default motion element, so the element is not defined within the subroutine, and an error is flagged.
  • A GOTO command is not allowed inside a WithGlobal block; an error is flagged.

Examples

 1 A1.VMax=5000
 2 
 3 A1.Vord=5000
 4 
 5 A1.VCruise=3000
 6 
 7 A1.PEMax=10
 8 
 9 A1.PESettle=0.01
10 
11 Move A1 100
12 
13 A2.VMax=5000
14 
15 A2.Vord=5000
16 
17 A2.VCruise=3000
18 
19 A2.PEMax=10
20 
21 A2.PESettle=0.01
22 
23 Move A2 100


Can be simplified using:


 1 WithGlobal A1
 2        VMax=5000
 3        Vord=5000
 4        VCruise=3000
 5        PEMax=10
 6        PESettle=0.01
 7        Move 100
 8 
 9 Withglobal A2
10        VMax=5000
11        Vord=5000
12        VCruise=3000
13        PEMax=10
14        PESettle=0.01
15        Move 100