AXY:MC-Basic:group.DECELERATIONRATE
}}
|UNITS= Percents
|DEFAULT= 100
|SCOPE= Task or Terminal
|LIMITATIONS= To set the value within a task, the group must be attached to that task or through the command line. The total decelerationrate value is combination of the system’s value and the element’s.
|EXAMPLE= Setting G1.drate = 70 will cause the system to reduce maximum deceleration value to 70% of its original value. This means the motion deceleration will not exceed: (sys.drate/100)*(g1.drate/100)*g1.dmax
?G1.drate
|SEE ALSO=
}}
-->