AXY:MC-Basic:axis.SMOOTHFACTOR/zh-hans

From SoftMC-Wiki
< AXY:MC-Basic:axis.SMOOTHFACTOR
Revision as of 03:20, 21 April 2017 by Chi (talk | contribs) (Created page with "{{Languages}} == 缩写 == <''axis''>.Smooth == 格式 == <''axis''>.SmoothFactor = <''expression''><br> ?<''axis''>.SmoothFactor == 可用版本 == 所有版本 == 描述...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
语言: English  • 中文（简体）‎

缩写

<axis>.Smooth

格式

<axis>.SmoothFactor = <expression>

?<axis>.SmoothFactor

可用版本

所有版本

描述

该属性用于控制应用于s曲线轨迹的平滑量。 可以将平滑因子设定为1到100范围内的值，大致对应于从V/A到3×V/A（其中V是巡航速度，A是加速度）的加速时间。

将因子设置为0会使梯形速度无法平滑。

将因子设置为-1为加加速度控制，以便设置JERK的确切值。 当SMOOTHFACTOR设置为-1时，JERK属性用于控制平滑程度。

该属性在运动命令中用于覆盖永久值。


IMPORTANT.svgIMPORTANT
  • If MODAL value of the PrfType equals -1 (default from 4.7.3!) the SmoothFactor is the only one who determines the profile type.

Values of the SmoothFactor between [1,100] and the value of -1 define the SINE-ACCELERATION profile and value of zero the VELOCITY-TRAPEZE profile.

  • If MODAL value of PrfType differs from -1, SmoothFactor has no influence on the type of the profile. Still the SmoothFactor defines the JERK value (as before).



类型

Double

取值范围

-1, 0, 1 to 100

单位

默认

1

使用范围

Configuration, Task or Terminal

限制

要在任务中设置值，轴必须关联到该任务中（使用ATTACH命令）

例子

Axis1.Smoothfactor = 30

Move Axis1 100 SmoothFactor = 20

参见

Retrieved from "http://softmc.servotronix.com/index.php?title=AXY:MC-Basic:axis.SMOOTHFACTOR/zh-hans&oldid=127456"