MC-Basic:SYSTEM.DIPSWITCH

From SoftMC-Wiki
Revision as of 11:17, 9 April 2014 by Rasty (talk | contribs)
Jump to: navigation, search

SYSTEM.DIPSWITCH reads a value of simulated DIP-Switch from file IO.DAT, from field "DIP". It contains the values of the individual bits in the DIPswitch byte. If SYSTEM.DIPSWITCH is qualified by a bit number, only that input bit is read. SYSTEM.DIPSWITCH.<bit_number> returns the value 1 or 0, depending on the setting of the switch.


File IO.DAT is generated automatically if it does not exist on the flash disk.
Format of IO.DAT
DIP=0xXX
INP=0xXX

Value of simulated DIP-Switch is read via SYSTEM.DIN Value of simulated Inputs is read via SYSTEM.DIN.1 trough SYSTEM.DIN.23

Bit # 6 directs the system not to load the Config.prg file during system startup.
       0= Config.prg and Autoexec.prg are not loaded.
       1 = Config.prg and Autoexec.prg are loaded. Default value should be 1 during normal operation.

Other bits reserved for system use.

Syntax

System.DipSwitch{.<bit number>}

Sys.DipSwitch{.<bit number>}

?System.DipSwitch{.<bit number>}

?Sys.DipSwitch{.<bit number>}

Availability

All versions; PCI and Standalone only

Type

<bit number>: Long

Value: Long

Range

<bit number>: 1 to 8

Value: 0 to 255 (0xFF)

Default

See description.

Scope

Configuration, Task or Terminal

Limitations

Read only

Examples

MyVar = System.DipSwitch

'MyVar is assigned the value of the input word

MyVar = System.DipSwitch.1

'MyVar is assigned 0 or 1, according to the value of the switch