AXY:MC-Basic:axis.VELOCITYCRUISE
This property specifies the desired cruise velocity. The motion generator attempts to reach this velocity during motion commands. The ability of the motion generator to reach this value is constrained by the value of ACCELERATION, DECELERATION, SMOOTHFACTOR and the final position. This property is used inside a motion command to override the permanent value.
Short form
<axis>.Vcruise
Syntax
<axis>.VelocityCruise = <expression>
?<axis>.VelocityCruise
Availability
All versions
Type
Double
Range
Greater than 0, Less than <axis>.VELOCITYMAX
Units
User velocity units, as given by <axis>.VELOCITYFACTOR
Default
500 counts per msec
Scope
Task or Terminal
Limitations
The actual cruise velocity cannot exceed the limit set by VELOCITYMAX. If motion is commanded with VCRUISE greater than VMAX, the command is executed, but the cruise velocity is limited to the value of VMAX. To set the value within a task, the axis must be attached to that task (using the ATTACH command).
Examples
Xaxis.VelocityCruise =67
Move Xaxis TargetPos Vcruise = xaxis.vmax