MC-Basic:SETENTRYPRIORITY
Sets the priority of the specified entry station . Recommended values are 2 to 16.
Even if entry station priority is set below default (2). Operating system’sTCP/ IP stack is still running at priority 2.
Short form
SETEP
Syntax
SETEP Type = <entry station type value> Priority = <priority value>
Availability
Versions 3.7.x and higher
Type
<entry station type value> : Long
<priority value> : Long
Range
<entry station type value> : 1 – Ethernet
2 – DPRAM
3 – Virtual Entry Station
4 – Etherent2
5 – Etherent3
<priority value> :: 1 to 16
Default
<priority value> : 2
Scope
Configuration, Task, Terminal
Examples
-->setep type = 1 priority = 3
-->?getentrypriority(1)
3