MC-Basic:pls.PLSPOSITION
Sets or queries individual PLS position values. When a PLS is defined, no PLS positions exist. A PLS position data structure must be created, using the CREATEPLSDATA command. This PPOS property is used to define PLS position values.
PLS positions are given in user units and are affected by the axis displacement and position factor properties. PLS positions are always absolute position values (not incremental values). The PLS position data must be monotonic or the PLS is not enabled.
Short form
<pls>.Ppos
Syntax
<pls>.PlsPosition[<index>] = <PLS position>
Availability
All versions
Type
Double
Range
<index>: 1 to the size of PLS data structure
<PLS position>: +/- MaxDouble
Units
User axis position units, as given by <axis>.POSITIONFACTOR
Default
0 (after the PLS data structure has been created)
Scope
Configuration, Task or Terminal
Limitations
The PLS position may be set only when the PLS is disabled.
Examples
PLS1.PlsPosition[5] = 2076.56