Debugging softMC Firmware Linux

Introduction

In some situations, a controller is no longer accessible with terminal of ControlStudio. This occurs when the controller has encountered a serious problem and tasks are suspended or the network stack of the operating system is corrupted. For the core-development it is necessary to collect data when such a situation occurs to collect data and analyze the root-cause to be able to fix/correct it.

This entry presents the controller file system and some useful commands for debugging.

Access to Linux Shell

COM1 of softMC is reserved for Linux shell.

Shell is used for editing FWCONFIG and IO.DAT or for solving problems such as:

• softMC does not boot
  
• softMC does not get IP address
  
• File system has overflow of log files or core dumps that need to be deleted manually.
  
• Autostart (CONFIG.PRG or AUTOEXEC.PRG) makes softMC unresponsive

Important: COM1 should not be used by applications

The shell has input and output by default on COM1.
Automatic login: user name mc, password mc
Also possible to login with ssh or telnet: user mc, password mc

File Locations

FWCONFIG
/FFS0/
Programs and Libraries:
/FFS0/SSMC/
Linux Log files
/var/log/
RAM disk
/RAM/

	NOTE
	Access to FWCONFIG file is allowed only under PRIVILEGELEVEL=1.

Useful Commands

• /sbin/ifconfig - gives IP information
• vi - text editor
• cp - copy files
• rm - delete files
• ls - list directory
• threads - lists linux threads
• df - free space on disk. For example "df /FFS0/ -h" will show free space on the flash disk
• du - space used by directory/files. For example "du /FFS0/ -h" will show usage of softMC libraries and programs

Application Autostart

No local I/O or dedicated DIP-switch for automatic start of application.

DIP-Switch is emulated. Firmware reads DIP-Switch value from file /FFS0/SSMC/IO.DAT
DIP=0x0
INP=0x00

Bit #6 of DIP-Switch is responsible for autostart of application.
IO.DAT is created automatically if it does not exist, values are zeros.

• IO.DAT can be edited either via softMC user interface or directly from Linux shell:
  

vi /FFS0/SSMC/IO.DAT

• Simplest way to disable autostart would be deletion of IO.DAT
  

rm /FFS0/SSMC/IO.DAT

FWCONFIG

FWCONFIG contains firmware initialization options.
Syntax:

option value[{byte|kbyte|mbyte}]

Supported options:

libstacksize

library stack size

taskstacksize

default task stack size

sysdatarecfilename

system data recorder file name

sysdatareclen

system data recorder length (number of records)

ipaddressmask

sets IP address and mask for motion controller.

• Examples:
  

ipaddressmask 192.168.20.20:255.255.0.0

ipaddressmask dhcp

defaultgw

sets default gateway, available since version 0.4.17.2

• Examples:
  

defaultgw 10.4.20.1

sleep

delay in millesconds

stringpreload

initial size of BASIC strings. Default is 0. Strings are created empty.

stringblockpreload

initial size of string descriptors. Default is 300,000. Reduce this value if application has less than 300,000 string variables.

translatormempartsize

initial size for translator memory partition

passbuffersize

...

hpetfreq

...

Examples:
ipaddressmask 192.168.20.20:255.255.0.0
sleep 20
libstacksize 20kbyte
hpetfreq 2000 for cycle time 500 microsecond or hpetfreq 1000 for cycle time up to 1 millisecond

TCP/IP keepalive timeouts

Refer to:

• Socket_keep-alive_timeouts

Troubleshooting a Software Crash

In case of software crash operating system creates complete snapshot of crashed process. Firmware saves snapshots to directory /cores.
These snapshots (or "core" files) contain important information and may help to improve software quality. It is recommended to check contents of /cores upload files to support@servotronix.com and erase contents of /cores.

softMC can be accessed with any SFTP software, such as WinSCP or Bitvise SSH client.
User name and password are given at the top of this page.