MC-Basic:element.VELOCITYOVERRIDE
| Language: | [[::MC-Basic:element.VELOCITYOVERRIDE|English]] • [[::MC-Basic:element.VELOCITYOVERRIDE/zh-hans|中文（简体）]] |
|---|
VELOCITYOVERRIDE modifies the actual element velocity by multiplying the velocity by the specified override value. Unlike other motion properties, it takes effect immediately. The actual velocity rate of change is limited by the axis deceleration value. the SYSTEM.VELOCITYOVERRIDE also affects the actual element velocity, and functions as an additional multiplier. Changing VELOCITYOVERRIDE takes 4 cycles (if the axis is moving), and delays the task execution by this amount of time. The axis velocity override has no effect when the axis is being moved as part of a group.
 | NOTE |
| VELOCITYOVERRIDE does not effect a slave axis as it is not moved via the profile generator. |
Short form
<element>.Vord
Syntax
<element>.VelocityOverride = <value>
Availability
All versions
Type
Double
Range
0.1 to 100000
Units
Percent
Default
100
Scope
Task or Terminal
Limitations
- write only
- Actual velocity rate of change is limited by the axis deceleration value.
Examples
G1.VelocityOverride=20
- ‘Set VORD to 20%