AXY:MC-Basic:group.DECELERATIONRATE
This property defines the group deceleration maximum scaling factor. Maximum values of deceleration can be scaled independently of velocity, acceleration or jerk.
Changing DecelerationRate factors of a group automatically changes the relevant factor of each axis to the new value.
Short form
<group>.DRate
Syntax
<group>.DecelerationRate = <expression>
?<group>.DecelerationRate
Availability
Since Version 4.0.1
Type
Double
Range
0.1 to 100
 | NOTE |
| Contrary to other properties if a value beyond the given range is assigned to rate properties (Vrate,Arate,Jrate, ...),only a NOTE will be returned and the value will be automatically limited to min-max value. For example Vrate = 0 will set Vrate to 0.1 and vrate = 1000 will set vrate to 100. |
Units
Percents
Default
100
Scope
Task or Terminal
Limitations
To set the value within a task, the group must be attached to that task or through the command line. The total decelerationrate value is combination of the system’s value and the element’s.
Examples
Setting G1.drate = 70 will cause the system to reduce maximum deceleration value to 70% of its original value. This means the motion deceleration will not exceed: (sys.drate/100)*(g1.drate/100)*g1.dmax
?G1.drate