softMI HMI Getting started

From SoftMC-Wiki
Revision as of 11:42, 10 May 2017 by Or.karni (talk | contribs)
Jump to: navigation, search

This is a tutorial for first configuration of SoftMC with SoftMI thru HMIStudio

Creating project and adding components

Open new project: File:HMI1.png

At the left side bar - "Graph Element Window" select HMI tab, and choose HMI type.


HMI2.png

At the left side bar - "Graph Element Window" select PLC tab, and choose controller / PLC type. Drag and drop in center window:

HMI3.png

At the left side bar - "Graph Element Window" select Connector tab, and choose communication type. In this example I choose Ethernet (TCP) Drag and drop in center window:

HMI4.png

At the pop up window - "Network Device Setting" press "Add". Set HMI IP, and choose correct Comm Protocol:

HMI5.png

Press "Add" again, and set SoftMC IP and comm protocol:

HMI6.png

After adding both HMI and PLC this is the final display:

HMI7.png

Retrieved from "http://softmc.servotronix.com/index.php?title=softMI_HMI_Getting_started&oldid=128801"