Dynamic Models
Revision as of 08:34, 22 May 2014 by Miborich (talk | contribs) (Miborich moved page Axystems:Dynamic Models to Dynamic Models: Global renaming of Axystems: namespace into (Main):)
This page gives an overview over all implemented dynamic models.
General considerations
- Friction is handled on axis basis. The parameters for friction are set for each axis separately.
Rotational Axes
Dynamic Model 1 - simple rotary axis
Number | Parameter | Comments |
---|---|---|
1 | Total moment of inertia around the rotation axis of the moved part |
- Model equation
Dynamic Model 2 - horizontal crank-arm axis
Number | Parameter | Comments |
---|---|---|
1 | Total moment of inertia around the rotation axis of the moved part | |
2 | Square of length of crank arm (axis to payload) |
- Model equation
Dynamic Model 3 - vertical crank-arm axis
Number | Parameter | Comments |
---|---|---|
1 | Total moment of inertia around the rotation axis of the moved part | |
2 | Square of length of crank arm (axis to payload) | |
3 | Mass (without payload) * Gravity * Distance to center of mass | |
4 | Gravity * Distance to Payload |
- Model equation
Linear Axes
Dynamic Model 1 - horizontal axis
Number | Parameter | Comments |
---|---|---|
1 | Total mass of the moved part. |
- Model equation
Dynamic Model 2 - vertical or tilted axis
Number | Parameter | Comments |
---|---|---|
1 | Total mass of the moved part. | |
2 | Constant force due to gravity. | |
3 | Gravity coefficient used to consider payload mass. (g = 9.80665) |
- Model equation
Traverse Arm Robots
Dynamic Model 1
Number | Parameter | Comments |
---|---|---|
1 | ||
2 | ||
3 | ||
4 | ||
5 | ||
6 | ||
7 |
Scara Robots
Dynamic Model 1
Number | Parameter | Comments |
---|---|---|
1 | ||
2 | ||
3 | ||
4 | ||
5 | ||
6 | ||
7 | ||
8 |
Delta Robots
Dynamic Model 1
Number | Parameter | Comments |
---|---|---|
1 | ||
2 | ||
3 | ||
4 | ||
5 | ||
6 | ||
7 | ||
8 | ||
9 | ||
10 | ||
11 | ||
12 | ||
13 | ||
14 |