AXY:MC-Basic:axis.DYNAMICMODEL
Revision as of 08:45, 22 May 2014 by Miborich (talk | contribs) (Miborich moved page Axystems:MC-Basic:axis.DYNAMICMODEL to MC-Basic:axis.DYNAMICMODEL: Global renaming of Axystems: namespace into (Main):)
Dynamic model of an axis.
The dynamic model calculates needed torques/forces during a commanded motion. The torques are then sent to the drives as "additional torque command" (torque feed forward), which helps to improve the motion performance.
Possible values:
- 0
- No dynamic model. All dynamic computation during axis motion for this axis are disabled.
- 1 ..
- See Dynamic Models for a list of available axis models.
- Model dependent parameters are expected to be set in Axystems:MC-Basic:axis.DYNAMICPARAMETER.
Syntax
<axis>.DynamicModel = <expression>
Availability
Since Version 4.7.14
Type
Long
Range
0, 1 .. 15
Default
0 (No dynamic model)
Scope
Task and Terminal
Limitations
- Read/Write
- Modal only