MC-Basic:PHASE
Start the correction process on the specific master slave couple. Add the user offset value to the master input before it is translated by cam table or by multiply by gear ratio. Ratio factor determines the smoothness of offset increasing until it reaches its final value.
Syntax
Phase <slave axis> <offset> ratio = <ratio factor>
Availability
Since Version 3.7.x
Range
<offset> : mindouble to maxdouble
<ratio factor> : above then zero
Units
<offset> : master position units
<ratio factor> : [master position unites / slave position units]
Default
<ratio factor> : 1
Scope
Task, terminal
Limitations
Axis must be slaved, command can’t be executed without offset value. Valid for axis only.
Examples
A1.mastersource = a2.pcmd
A1.slave = CAM
Phase a1 10 ratio = 1