MC-Basic:group.SELECTAXES
Select which of the target coordinates will be taken, and which not (those with the corresponding bit value set to zero). The value is a bit-field defining the axes that will be involved in the movement. (1 – axis is taken). Used when there is a need to disengage movement of some axis throughout the system.
For example:
moving only first axis - 0001 bin (1 dec)
moving only second axis - 0010 bin ( 2 dec )
moving only third axis – 0100 bin ( 4 dec )
moving only fourth axis – 1000 bin ( 8 dec )
moving all four axes – 1111 bin (15 dec)
Short form
<GROUP>.SAxes
Syntax
<GROUP>.SelectAxes
Availability
Versions 3.6.20 and higher
Type
Long
Range
See the description
Default
2<number of axes in the group>-1
Scope
Configuration, Task, Terminal
Limitations
Valid for groups only.
Examples
G1.selectaxes = 1+2
Move G1 {10,20,30} saxes = 1+2 ‘only first two axes move
Move G2 {10,20,30,40} saxes = 1+2+4 ‘ only first three axes move