MC-Basic:SETENTRYPRIORITY

Sets the priority of the specified entry station . Recommended values are 2 to 16.

	IMPORTANT
	Even if entry station priority is set below default (2). Operating system’sTCP/ IP stack is still running at priority 2.

Short form

SETEP

Syntax

SETEP  Type = <entry station type value> Priority = <priority value>

Availability

Since Version 3.7.x

Type

<entry station type value> :          Long

<priority value> :                          Long

Range

<entry station type value> :          1 – Ethernet
                                                       2 – DPRAM
                                                       3 – Virtual Entry Station
                                                       4 – Etherent2

5 – Etherent3

<priority value> ::                        1 to 16

Default

<priority value> :              2

Scope

Configuration, Task, Terminal

Examples

-->setep type = 1 priority = 3

-->?getentrypriority(1)

3

See Also

• REDIRECTSTDOUT
• ENTRYSTATIONTYPE
• GETENTRYPRIORITY
• RESETENTRYSTATION