Template:MC-Basic/ErrorCodeHeader

From SoftMC-Wiki
< Template:MC-Basic
Revision as of 09:32, 14 December 2010 by Arwiebe (talk | contribs) (added description)
Jump to: navigation, search

Header for error codes tables in MC-Basic reference (AMCS Firmware).

Template

{{MC-Basic/ErrorCodeHeader|
contents
}}

Parameters

contents
Error code entries, which require the {{MC-Basic/ErrorCode}} template.

Operation

The error number is automatically anchored. A reference to a number within the page can be done with #2.

Examples

Input
{{MC-Basic/ErrorCodeHeader|
{{MC-Basic/ErrorCode|1|CPU Divide error|Generated by the CPU if the divisor is zero or the quotient overflows the result register.|ASYNC|Fatal Fault|Watchdog}}
{{MC-Basic/ErrorCode|2|CPU Debug|Generated by the CPU after each instruction if Trap Flag is set.|ASYNC|Fatal Fault|Watchdog}}
{{MC-Basic/ErrorCode|3|CPU NMI|Generated by the CPU when the input to the NMI pin is asserted|ASYNC|Fatal Fault|Watchdog}}
}}
Output
Number Message Description Type Severity Action
1 CPU Divide error Generated by the CPU if the divisor is zero or the quotient overflows the result register. ASYNC Fatal Fault Watchdog
2 CPU Debug Generated by the CPU after each instruction if Trap Flag is set. ASYNC Fatal Fault Watchdog
3 CPU NMI Generated by the CPU when the input to the NMI pin is asserted ASYNC Fatal Fault Watchdog

For more examples refer to pages, which use this template: What links here.

Help:Templates describes general usage of templates, including treatment of special characters.