Program Examples:Cyclic recording of one Axis
Introduction
Inon
Program flow
Inon
Program
Introduction
The following example demonstrate how to record an external interference in one axis.
Program flow
The program refer to the axis that it should check, and set motion command for it.
Program
'------------------------------------------------------------------------------
' File: <Cyclic_rec>.prg
' Purpose: To record an external interference to axis
' Version: 1.00
' Author: <Inon Shoshani>
' Description: External interference recording - look for the Introduction
' History: 2017-06-12 V1.00
' Created
'------------------------------------------------------------------------------
common shared ii as long = 1 '' define a var as a flag
program
attach a1
Record CycRec.rec 500 Gap = 4 RingBuffer=On RecData = a1.VFb ,a1.VCmd
RecordOn
a1.En= 1
jog a1 360 ''set motion command 360 degree per second.
sleep 1000 '' wait the velocity to become constant
while (ii=1) ''run while the falg is up
sleep 10 ''10 millisecond for the proccesor
if a1.VFb <50 then ''if the motion fail
RecordClose '''stop the recording
sleep 10
print "---------" '' monitoring the fault
print "fail time:", sys.Time '' monitoring the fault
print "a1.VFb = " , a1.VFb '' monitoring the fault
ii=0 ''flag down
a1.En =0
detach a1
end if
end while
end program ' <Cyclic_rec>.prg
Plots
