Modbus Communication API

Overview

Basic Overview

• This describes how to set up Modbus communication for the softMC, and how to generate softMC scripts to handle Modbus communication.
• It is assumed you are familiar with the principles of Modbus communication, although some of them will be described in this page.
• It is also assumed your are familiar with the softMC, ControlStudio and MC-Basic programming.

Modbus Communication Background

• A Motion Controller (MC) can act as a server (slave), a client (master) or both at the same time.
• Each MC connection (TCP/RTU) can be used either as a server component (if the connection is used by the MC’s server-side) or as a client component (if the connection is used by the MC’s client-side).
• Each component has its own parameters that defines it.
• When the MC acts as a server, all server components share the same memory address space, thus acting as one server with multiple connections.
• Each server (slave) on a Modbus network has its own deviceID, which is a number between 1 and 247.

The Modbus server registers

• There are 4 types of registers in the Modbus Server address space:
  1. Bits (1-bit registers)
  2. Input Bits (1-bit READ-ONLY registers)
  3. Holding Registers (16-bit registers)
  4. Input Registers (16-bit READ-ONLY registers)
• Servers can read and write their own address space.
• Clients can read and write a remote server’s address space.

Getting Started

In order to get started in using the Modbus features:

1. Download the required files, according to your system's type:
   1. Required files for modbus_X86.ZIP.
   2. Required files for ARM systems.
2. Using the ControlStudio File Manager, Upload the following files to your MC:
   1. mb_x86.O (for X86 Systems) / mb_armA9.O (for ARM Systems)
   2. Modbus.lib
   • Notice: From now on, in our examples, we'll use the X86 configuration.
     
3. Load the files to memory, by typing (in the Terminal):

   Oload mb_x86.O
   loadglobal Modbus.lib

Initializing a Modbus Server

To initialize the Modbus server address space, call:

?init_multi_server([bits],[input_bits],[holding registers],[input_registers])

• The function prints "success" and returns 0 on success, or return an error code on failure.
• Notice:
  1. This is NOT required when softMC does not run a modbus server.
  2. You can call this method only if no servers are running.

Error codes:

Error	Meaning
-1	Memory allocation failure.
-2	Some servers are still running and using an already mapped address space.
-3	Failed to create a modbus mapping.

Server Components

Adding server components

• Each time you'll add a component, you will receive a handle, which is the component's identifier (for later use).
• It is best to keep this handles in variables inside your program.

Creating a TCP server component

handle = mb_tcp_server_create([port],[deviceID])

• This opens a TCP connection to the server on port [port] with deviceID [deviceID], and starts the created server immediately.
• Returns a handle on success, or an error code on failure.

Creating an RTU server component

handle = mb_rtu_server_create([type],[port],[baudrate],[data bits],[stop bits],[parity],[deviceID])

• This opens an RTU connection with the given parameters, and starts the created server immediately.
• Returns a handle on success, or an error code on failure.

Stopping Server Components

Stopping a specific server component

You can stop a specific server component by passing its handle to:

result = mb_server_stop([handle])

• Given a handle, this will stop and free the memory of the appropriate server component.
• Returns 0 on success, -1 on failure.

Stopping all server components

You can stop all server components with a single call to:

result = mb_server_stop_all

This function will:

• Stop and free all server components.
• Free the shared address space.
• Return 0 on success, -1 on failure.

Client Components

Adding client components

• Each time you'll add a component, you will receive a handle, which is the component's identifier (for later use).
• It is best to keep this handles in variables inside your program.

Adding a TCP Client component

handle = mb_tcp_client_create([ip],[port])

• This will opens a TCP connection to the client on the given ip and port, and start the client immediately.
• Returns a handle on success, -1 on failure.

Adding an RTU Client component

handle = mb_rtu_client_create([type],[port],[baudrate],[data bits],[stop bits],[parity])

• This will open an RTU connection to the client with the given parameters, and start the client immediately.
• Returns a handle on success, -1 on failure.

Stopping client components

A specific client can be stopped by calling:

result = mb_client_stop([handle])

• Given a handle, this will stop and free the memory of the appropriate client component.
• Returns 0 on success, -1 on failure.

Reset the Modbus System

Sometimes, a user may wish to stop all server and client components at once, and reset the Modbus system (for example, when a user want to initialize a different Modbus system). To do that, call:

result = mb_reset

This function:

• Stops all running servers and clients.
• Frees their memory.
• Frees the shared address space.
• Reset the handle counter.
• Returns 0 on success, -1 on failure.

Reading and Writing

• Servers can read and write their own address space.
• Clients can read and write a remote server’s address space.
• Therefore, Servers and clients use different functions to read/write data from the address space.

Server Components

Reading

Reading from Holding registers

Val = MB_SERVER_READ_REG_LONG(…)
Val = MB_SERVER_READ_REG_SHORT(…)
Val = MB_SERVER_READ_REG_FLOAT(…)
Val = MB_SERVER_READ_REG_DOUBLE(…)

Reading from Bits registers

val = MB_SERVER_READ_BIT([addr])

Reading from Input registers

Val = MB_SERVER_READ_INREG_LONG(…)
Val = MB_SERVER_READ_INREG_SHORT(…)
Val = MB_SERVER_READ_INREG_FLOAT(…)
Val = MB_SERVER_READ_INREG_DOUBLE(…)

Reading from Input Bits registers

 val = MB_SERVER_READ_INBIT([addr])

Writing

Writing to holding registers

Val = MB_SERVER_WRITE_REG_LONG(…)
Val = MB_SERVER_WRITE_REG_SHORT(…)
Val = MB_SERVER_WRITE_REG_FLOAT(…)
Val = MB_SERVER_WRITE_REG_DOUBLE(…)

Writing to Bits registers

val = MB_SERVER_WRITE_BIT([addr],[value])

Writing to Input registers

Val = MB_SERVER_WRITE_INREG_LONG(…)
Val = MB_SERVER_WRITE_INREG_SHORT(…)
Val = MB_SERVER_WRITE_INREG_FLOAT(…)
Val = MB_SERVER_WRITE_INREG_DOUBLE(…)

Writing to Input Bits registers

val = MB_SERVER_WRITE_INBIT([addr],[value])

Client Components

Reading

Reading from Holding registers

Val = MB_CLIENT_READ_REG_LONG([handle],[deviceID],[addr],[dest ptr])
Val = MB_CLIENT_READ_REG_SHORT(…)
Val = MB_CLIENT_READ_REG_FLOAT(…)
Val = MB_CLIENT_READ_REG_DOUBLE(…)

Reading from Bits registers

val = MB_CLIENT_READ_BITS ([handle],[deviceID],[addr],[num of bits],[dest arr ptr])

Reading from Input registers

Val = MB_CLIENT_READ_INREG_LONG ([handle],[deviceID],[addr],[dest ptr]) 
Val = MB_CLIENT_READ_INREG_SHORT(…)
Val = MB_CLIENT_READ_INREG_FLOAT(…)
Val = MB_CLIENT_READ_INREG_DOUBLE(…)

Reading from Input Bits registers

val = MB_CLIENT_READ_INBITS ([handle],[deviceID],[addr],[num of bits],[dest arr ptr])

Writing

Writing to Holding registers

Val = MB_CLIENT_WRITE_REG_LONG([addr],[val ptr],[deviceID])
Val = MB_CLIENT_WRITE_REG_SHORT(…)
Val = MB_CLIENT_WRITE_REG_FLOAT(…)
Val = MB_CLIENT_WRITE_REG_DOUBLE(…)

Writing to Bits registers

val = MB_CLIENT_WRITE_BIT([addr],[val ptr],[deviceID])

Reading and Writing Summary