Difference between revisions of "MC-Basic:axis.TORQUEERRORDISABLETYPE"
(Created page with '{{MC-Basic |SHORT FORM= ''<axis>''.TorqueErrorDisableType |SYNTAX= ?''<axis>''. TorqueErrorDisableType |AVAILABILITY= AMCS 4.5.x |DESCRIPTION= Defines the torque-error collisi…') |
m (1 revision) |
(No difference)
| |
Revision as of 16:09, 13 December 2010
Defines the torque-error collision procedure. If the TE > TEMAX axis is disabled after it is stopped by the stop profile defined by TorqueErrorStopType, according to values of TorqueErrorDisableType:
0 normal
1 high-power
2 TBD
Short form
<axis>.TorqueErrorDisableType
Syntax
?<axis>. TorqueErrorDisableType
Availability
AMCS 4.5.x
Type
Integer
Range
0 to 2
Default
0
Scope
Configuration, Task or Terminal
Limitations
Read/Write only, Modal Only
Examples
?A1.TorqueErrroDisableType