Difference between revisions of "softMC as OPC UA Server"
| Line 2: | Line 2: | ||
[[File:OPC 01.jpg|RTENOTITLE]] | [[File:OPC 01.jpg|RTENOTITLE]] | ||
| − | + | To enable softMC OPC UA you need: | |
| + | |||
| + | OPC_UA.LIB , if you do not have the file contact servotronix support | ||
| + | |||
| + | Load it from the config.prg | ||
<u>CONFIG.PRG</u> | <u>CONFIG.PRG</u> | ||
| Line 36: | Line 40: | ||
.. | .. | ||
| − | Load | + | Load .prg |
StartTask OPC_GL.prg | StartTask OPC_GL.prg | ||
Revision as of 13:28, 13 January 2019
To enable softMC OPC UA you need:
OPC_UA.LIB , if you do not have the file contact servotronix support
Load it from the config.prg
CONFIG.PRG
program
..
Print "system is running - "
Sys.DoubleFormat = 1
Load opc_ua.lib
..
end program
AUTOEXEC.PRG
Program Continue
dim x as long
Load startprg.prg
while startprg.prg.state <> 10
sleep 500
end while
..
Load .prg
StartTask OPC_GL.prg
Print "OPC UA Global value ready"
x =stop_start_server
…
End Program
IND4.PRG
common shared A1_PWRTEMP as long
common shared A1_POWER as long
common shared A1_Cycle as long
common shared A2_PWRTEMP as long
common shared A2_POWER as long
common shared A2_Cycle as long
program
A1_Cycle = 2
A2_Cycle = 4
while 1
A1_PWRTEMP=ec_sdo_read(a1.dadd,0x2044,2)
A1_POWER = abs(a1.TFb) * abs(a1.vfb) / 1000
A2_PWRTEMP=ec_sdo_read(a2.dadd,0x2044,2)
A2_POWER = a2.TFb * a2.vfb / 1000
sleep 10
end while
end program