Difference between revisions of "Program Examples - Robot Helix motion"

From SoftMC-Wiki
Jump to: navigation, search
Line 2: Line 2:
  
 
{|  cellpadding="10"  cellspacing="0"  border="1"  
 
{|  cellpadding="10"  cellspacing="0"  border="1"  
|'''[[File:Helix1.JPG]]''' ||'''[[File:Helix2.JPG]]''' || '''[[File:Helix3.JPG]]''' ||'''[[File:Helix4.JPG]]'''
+
|'''[[File:Helix1.JPG]]''' ||'''[[File:Helix22.JPG]]''' || '''[[File:Helix3.JPG]]''' ||'''[[File:Helix4.JPG]]'''
 
|}
 
|}
 +
  
 
Helix.PRG:
 
Helix.PRG:

Revision as of 15:48, 22 January 2017

here is an example of doing Robot Helix movement. We use puma 6 axis robot in this example:

Helix1.JPG Helix22.JPG Helix3.JPG Helix4.JPG


Helix.PRG:

'------------------------------------------------------------------------------
' File:        Helix.prg
' Purpose:     generating puma helix motion
' Version:     1.00
' Author:      Eran Korkidi
' History:     10.DEC.2015    -    created
'------------------------------------------------------------------------------

' module global "constants"


' module global variables
dim shared ZeroPosition as joint of xyzypr = {0,0,0,0,0,0}
dim shared StartPosition as joint of xyzypr = {-45,45,0,0,45,0}

dim shared HelixCenter as location of xyzypr = #{0 , 1200 , 250 , 0 , 180 , -90}
dim shared HelixStart as location of xyzypr =  #{0 , 1000 , -50 , 0 , 180 , -90}

dim shared RobotVelocity as double = 40.0

program

    Sys.Vrate = 100.0
    with Puma
        Attach
            En = TRUE
            Sleep 100
            while NOT En
                Sleep 100
            Vcruise = RobotVelocity          'Set robot's cruise velocity 
            end while
            Move ZeroPosition
            call waitMotion
                call helixMotion
            Move ZeroPosition
            call waitMotion
        Detach
    end with    

end program


sub helixMotion

    dim i as long

    PUMA.BlendingMethod = 1
    PUMA.Cp = 2
    Move PUMA ZeroPosition
    call waitMotion
    Move PUMA HelixStart
    call waitMotion
    for i = 1 to 3
         Circle PUMA Angle=3*360 CircleCenter = HelixCenter Vtran = PUMA.VmTran     'Circle center has different Z coordinate then circle starting point - causing Helix and not plane circle
         Moves PUMA HelixStart Vtran=PUMA.VmTran                                    'Moves to start point in stright line (translation)
    next i
    Move PUMA ZeroPosition
    call waitMotion
    
end sub

sub waitMotion
    while puma.IsMoving
        Sleep 1
    end while
end sub