Difference between revisions of "AXY:MC-Basic:axis.DYNAMICMODEL"
| Line 39: | Line 39: | ||
|EXAMPLE= | |EXAMPLE= | ||
|SEE ALSO= | |SEE ALSO= | ||
| − | * [[ | + | * [[Motion Dynamics]] |
* [[MC-Basic:axis.DYNAMICPARAMETER|axis.DYNAMICPARAMETER]] | * [[MC-Basic:axis.DYNAMICPARAMETER|axis.DYNAMICPARAMETER]] | ||
* [[MC-Basic:group.DYNAMICMODEL|group.DYNAMICMODEL]] | * [[MC-Basic:group.DYNAMICMODEL|group.DYNAMICMODEL]] | ||
Revision as of 08:56, 22 May 2014
Dynamic model of an axis.
The dynamic model calculates needed torques/forces during a commanded motion. The torques are then sent to the drives as "additional torque command" (torque feed forward), which helps to improve the motion performance.
Possible values:
- 0
- No dynamic model. All dynamic computation during axis motion for this axis are disabled.
- 1 ..
- See Dynamic Models for a list of available axis models.
- Model dependent parameters are expected to be set in MC-Basic:axis.DYNAMICPARAMETER.
Syntax
<axis>.DynamicModel = <expression>
Availability
Since Version 4.7.14
Type
Long
Range
0, 1 .. 15
Default
0 (No dynamic model)
Scope
Task and Terminal
Limitations
- Read/Write
- Modal only