Difference between revisions of "MC-Basic:axis.VELOCITYEXTERNALFACTOR"
| Line 41: | Line 41: | ||
* [[MC-Basic:axis.POSITIONEXTERNAL|axis.POSITIONEXTERNAL]] | * [[MC-Basic:axis.POSITIONEXTERNAL|axis.POSITIONEXTERNAL]] | ||
* [[MC-Basic:axis.POSITIONEXTERNALFACTOR|axis.POSITIONEXTERNALFACTOR]] | * [[MC-Basic:axis.POSITIONEXTERNALFACTOR|axis.POSITIONEXTERNALFACTOR]] | ||
| − | * [[ | + | * [[MC-Basic:axis.VELOCITYEXTERNAL|axis.VELOCITYEXTERNAL]] |
}} | }} | ||
Revision as of 08:48, 22 May 2014
The velocity factor of the external feedback is used to convert that value from counts per millisecond into physical units.
Short form
<axis>.VExtFac
Syntax
<axis>.VelocityExternalFactor = <expression>
?<axis>.VExtFac
Availability
All versions
Type
Double
Range
Greater than 0
Default
1
Scope
Configuration, Task or Terminal
Limitations
Cannot be changed while axis is enabled or while axis is set up as a master axis.
Examples
If the feedback resolution is 2000 counts, and you want to work in RPM, the VFAC is set as:
- Xaxis.vExtFac = 2000/60000
- Xaxis.vExtFac = 2000/60000
To work in revolutions per second, the VFAC must be set as:
- Xaxis.VExtFac = 2000/1000