Difference between revisions of "MC-Basic:cam.CYCLE"
m (Text replace - " Cam table" to " cam table") |
|||
| Line 36: | Line 36: | ||
|SEE ALSO= | |SEE ALSO= | ||
| − | * [[ | + | * [[MC-Basic:axis.ACTIVECAM|axis.ACTIVECAM]] |
* [[Axystems:MC-Basic:axis.CAMCYCLE|axis.CAMCYCLE]] | * [[Axystems:MC-Basic:axis.CAMCYCLE|axis.CAMCYCLE]] | ||
}} | }} | ||
Revision as of 08:43, 22 May 2014
This property sets the number of cycles for which the cam table is to be executed. A cam table is repeated when the master passes the end of the table and the number of cycles is a value greater than 1. Setting the number of cycles to the value -1 enables the table to be repeated continually. The number of cycles is changed while camming is enagaged.
Short form
Cyc
Syntax
<cam>.Cycle = <number of cycles>
?<cam>.Cycle
Availability
All versions
Type
Long
Range
-1, 1 to MaxLong
Default
1
Scope
Configuration, Task or Terminal
Examples
Cam1.Cycle = -1