Difference between revisions of "AXY:MC-Basic:axis.JERKFACTOR"
| Line 41: | Line 41: | ||
|SEE ALSO= | |SEE ALSO= | ||
| − | * [[ | + | * [[MC-Basic:axis.ACCELERATIONFACTOR|axis.ACCELERATIONFACTOR]] |
* [[Axystems:MC-Basic:axis.POSITIONFACTOR|axis.POSITIONFACTOR]] | * [[Axystems:MC-Basic:axis.POSITIONFACTOR|axis.POSITIONFACTOR]] | ||
* [[Axystems:MC-Basic:axis.VELOCITYFACTOR|axis.VELOCITYFACTOR]] | * [[Axystems:MC-Basic:axis.VELOCITYFACTOR|axis.VELOCITYFACTOR]] | ||
Revision as of 08:43, 22 May 2014
This property specifies the conversion factor between user jerk units and the internal units [counts per ms3]. The axis JERKFACTOR must contain the conversion factor for both the position dimension and the time dimension.
Short form
<axis>.Jfac
Syntax
<axis>.JerkFactor = <expression>
?<axis>.JerkFactor
Availability
All versions
Type
Double
Range
Greater than zero
Default
65536/6e10. This value is suitable for working in units of rpm/s2 with resolver feedback.
Scope
Configuration, Task or Terminal
Limitations
- Cannot be changed while axis is enabled or while axis is set up as a master axis.
- To set the value within a task, the axis must be attached to that task (using the ATTACH command).
- JERKFACTOR is in effect only when the SMOOTHFACTOR is set to -1. Otherwise, JERKFACTOR is always set to ACCELERATIONFACTOR/1000.
Examples
A1.Jfac = A1.Pfac/(10003)
- Position units per second3
Xaxis.Jfac = Xaxis.AccelerationFactor / 1000
- Acceleration units per second