Difference between revisions of "MC-Basic:axis.DRIVEON"
m (Text replace - "''<expression>''" to "<''expression''>") |
m |
||
| Line 12: | Line 12: | ||
|DESCRIPTION= | |DESCRIPTION= | ||
This property allows direct control over control bit 15. When this bit and bit 14 (DRIVEENABLE) are set to 1, the drive is enabled (if all other conditions for enable are met (e.g., no faults, remote enable is high)). This bit set to 0 results in an active disable on the drive (the drive stops the motor and then disable itself). Direct use of this bit is usually not necessary. Use the <''axis''>.ENABLE property to enable and disable the drive. A query of this property returns the state of this request and not the state of the drive. | This property allows direct control over control bit 15. When this bit and bit 14 (DRIVEENABLE) are set to 1, the drive is enabled (if all other conditions for enable are met (e.g., no faults, remote enable is high)). This bit set to 0 results in an active disable on the drive (the drive stops the motor and then disable itself). Direct use of this bit is usually not necessary. Use the <''axis''>.ENABLE property to enable and disable the drive. A query of this property returns the state of this request and not the state of the drive. | ||
| − | |||
| − | |||
|TYPE= | |TYPE= | ||
| Line 31: | Line 29: | ||
|LIMITATIONS= | |LIMITATIONS= | ||
| − | Executed only in SERCOS communication phase 4 | + | *Executed only in SERCOS communication phase 4 |
| + | *Not supported in EtherCAT system | ||
|EXAMPLE= | |EXAMPLE= | ||
Revision as of 12:29, 26 March 2014
This property allows direct control over control bit 15. When this bit and bit 14 (DRIVEENABLE) are set to 1, the drive is enabled (if all other conditions for enable are met (e.g., no faults, remote enable is high)). This bit set to 0 results in an active disable on the drive (the drive stops the motor and then disable itself). Direct use of this bit is usually not necessary. Use the <axis>.ENABLE property to enable and disable the drive. A query of this property returns the state of this request and not the state of the drive.
Short form
<axis>.DOn
Syntax
<axis>.DriveOn = <expression>
?<axis>.DriveOn
Availability
All versions
Type
Long
Range
0 or 1
Scope
Configuration, Task or Terminal
Limitations
- Executed only in SERCOS communication phase 4
- Not supported in EtherCAT system
Examples
?a1.don