Difference between revisions of "MC-Basic:axis.MOTIONBUSVELOCITYBASE"
m (Text replace - "''<value>''" to "<''value''>") |
|||
| Line 11: | Line 11: | ||
|DESCRIPTION= | |DESCRIPTION= | ||
| − | Used for scaling | + | Used for scaling the Motion-Bus velocity command (SERCOS: IDN37 and IND36, EtherCat: PDO 0x6081) according to: |
| + | |||
| + | '''''velocity_in_motion_bus_units''''' = velocity_per_ms × (MotionBusVelocityScale × period + MotionBusVelocityBase) | ||
| + | |||
| + | |||
| + | {{Note| To send velocity in counts per ms, the following values must be set:<br><nowiki>MotionBusVelocityScale = 0</nowiki> <br> <nowiki>MotionBusVelocityBase = 1</nowiki>}} | ||
| − | |||
| − | |||
|TYPE= | |TYPE= | ||
Revision as of 14:00, 18 March 2014
Used for scaling the Motion-Bus velocity command (SERCOS: IDN37 and IND36, EtherCat: PDO 0x6081) according to:
velocity_in_motion_bus_units = velocity_per_ms × (MotionBusVelocityScale × period + MotionBusVelocityBase)
 | NOTE |
| To send velocity in counts per ms, the following values must be set: MotionBusVelocityScale = 0 MotionBusVelocityBase = 1 |
Short form
none
Syntax
<axis>.MotionBusVelocityBase = <value>
?<axis>. MotionBusVelocityBase
Availability
4.2.x
Type
Long
Range
0 ... + MAXL
Default
0
Scope
Configuration, Task or Terminal
Examples
Axis1.MotionBusVelocityBase = 256