Difference between revisions of "AXY:MC-Basic:axis.JERKFACTOR"
| Line 35: | Line 35: | ||
|EXAMPLE= | |EXAMPLE= | ||
A1.Jfac = A1.Pfac/(1000<sup>3</sup>) | A1.Jfac = A1.Pfac/(1000<sup>3</sup>) | ||
| − | ::::Position units per second<sup>3</sup | + | ::::Position units per second<sup>3</sup> |
| − | Xaxis.Jfac = Xaxis.AccelerationFactor / 1000 | + | Xaxis.Jfac = Xaxis.AccelerationFactor / 1000 |
::::Acceleration units per second | ::::Acceleration units per second | ||
Revision as of 12:03, 18 March 2014
This property specifies the conversion factor between user jerk units and the internal units [counts per ms3]. The axis JERKFACTOR must contain the conversion factor for both the position dimension and the time dimension.
Short form
<axis>.Jfac
Syntax
<axis>.JerkFactor = <expression>
?<axis>.JerkFactor
Availability
All versions
Type
Double
Range
Greater than zero
Default
65536/6e10. This value is suitable for working in units of rpm/s2 with resolver feedback.
Scope
Configuration, Task or Terminal
Limitations
- Cannot be changed while axis is enabled or while axis is set up as a master axis.
- To set the value within a task, the axis must be attached to that task (using the ATTACH command).
- JERKFACTOR is in effect only when the SMOOTHFACTOR is set to -1. Otherwise, JERKFACTOR is always set to ACCELERATIONFACTOR/1000.
Examples
A1.Jfac = A1.Pfac/(10003)
- Position units per second3
Xaxis.Jfac = Xaxis.AccelerationFactor / 1000
- Acceleration units per second