Difference between revisions of "AXY:MC-Basic:axis.DYNAMICMODEL"
| Line 18: | Line 18: | ||
;1 .. | ;1 .. | ||
: See [[Axystems:Dynamic Models]] for a list of available axis models. | : See [[Axystems:Dynamic Models]] for a list of available axis models. | ||
| + | : Model dependent parameters are expected to be set in [[Axystems:MC-Basic:axis.DYNAMICPARAMETER]]. | ||
|TYPE= | |TYPE= | ||
Revision as of 14:06, 18 October 2011
Dynamic model of an axis.
The dynamic model calculates needed torques/forces during a commanded motion. The torques are then sent to the drives as "additional torque command" (torque feed forward), which helps to improve the motion performance.
Possible values:
- 0
- No dynamic model. All dynamic computation during axis motion for this axis are disabled.
- 1 ..
- See Axystems:Dynamic Models for a list of available axis models.
- Model dependent parameters are expected to be set in Axystems:MC-Basic:axis.DYNAMICPARAMETER.
Syntax
<axis>.DynamicModel = <expression>
Availability
FW 4.7.14
Type
Long
Range
0, 1 .. 15
Default
0 (No dynamic model)
Scope
Task and Terminal
Limitations
- R/W
- Modal only