Difference between revisions of "AXY:MC-Basic:group.DECELERATIONRATE"
m (1 revision) |
(4626) |
||
| Line 21: | Line 21: | ||
|RANGE= | |RANGE= | ||
0.1 to 100 | 0.1 to 100 | ||
| + | |||
| + | {{Note| Contrary to other properties if a value beyond the given range is assigned to '''rate''' properties <nowiki>(Vrate,Arate,Jrate, ...)</nowiki>,only a NOTE will be returned and the value will be automatically limited to min-max value. <br>For example <nowiki>Vrate = 0</nowiki> will set Vrate to 0.1 and <nowiki>vrate = 1000</nowiki> will set vrate to 100. {{Bugzilla|4626}}}} | ||
| + | |||
| + | |||
|UNITS= | |UNITS= | ||
Revision as of 08:16, 17 January 2011
This property defines the group deceleration maximum scaling factor. Maximum values of deceleration can be scaled independently of velocity, acceleration or jerk.
Changing DecelerationRate factors of a group automatically changes the relevant factor of each axis to the new value.
Short form
<GROUP>.DRate
Syntax
<GROUP>.DecelerationRate = <expression>
?<GROUP>.DecelerationRate
Availability
Versions 4.0.1 and higher
Type
Double
Range
0.1 to 100
 | NOTE |
| Contrary to other properties if a value beyond the given range is assigned to rate properties (Vrate,Arate,Jrate, ...),only a NOTE will be returned and the value will be automatically limited to min-max value. For example Vrate = 0 will set Vrate to 0.1 and vrate = 1000 will set vrate to 100. Issue 4626  |
Units
Percents
Default
100
Scope
Task or Terminal
Limitations
To set the value within a task, the group must be attached to that task or through the command line. The total decelerationrate value is combination of the system’s value and the element’s.
Examples
Setting G1.drate = 70 will cause the system to reduce maximum deceleration value to 70% of its original value. This means the motion deceleration will not exceed: (sys.drate/100)*(g1.drate/100)*g1.dmax
?G1.drate