AXY:MC-Basic:group.DECELERATIONRATE

This property defines the group deceleration maximum scaling factor. Maximum values of deceleration can be scaled independently of velocity, acceleration or jerk.

Changing DecelerationRate factors of a group automatically changes the relevant factor of each axis to the new value.

Short form

<group>.DRate

Syntax

<group>.DecelerationRate = <expression>

?<group>.DecelerationRate

Availability

Since Version 4.0.1

Type

Double

Range

0.1 to 100

	NOTE
	Contrary to other properties if a value beyond the given range is assigned to rate properties (Vrate,Arate,Jrate, ...),only a NOTE will be returned and the value will be automatically limited to min-max value. For example Vrate = 0 will set Vrate to 0.1 and vrate = 1000 will set vrate to 100.

Units

Percents

Default

100

Scope

Task or Terminal

Limitations

To set the value within a task, the group must be attached to that task  or through the command line. The total decelerationrate value is combination of the system’s value and the element’s.

Examples

Setting G1.drate = 70 will cause the system to reduce maximum deceleration value to 70% of its original value. This means the motion deceleration will not exceed: (sys.drate/100)*(g1.drate/100)*g1.dmax

?G1.drate

See Also

• SYSTEM.DECELERATIONRATE